User Submitted:
Claybars, T-Cut
I've used t-cut on a few occasions when I had minor scratches, or when a panel was faded and needed restoring to it's original color. But claybars scare me a little because of the scuffed patches they can leave.
Do you use clay bars?
Bookmark/Search this post with:
| 
| 
| 
| 
| 
| 
| 
| 
I don't use anything with
I don't use anything with potential for scuffing without taping off the area. I still would rather use something else without the possibility of scuffs. Taping off the area as close as possible seems to work pretty well though.
Something like
Something like Mother's clay is just fine as long as you make sure to use a lubricant with it, and don't scrub. It can really help with getting rid of things like rust contamination, just don't go overboard.